Hi friends, Sue Rasmussen here—Instructor of the Advanced Water Heater and Furnace Class at the National RV Training Academy (NRVTA). As the weather starts to cool down, many of you will be turning on your RV furnaces for the first time in a while.
But what happens if you flip the switch, hear the fan start up, and then—nothing? No heat. Just cold air for 15–20 seconds before the system shuts down. Or maybe worse—absolutely nothing happens at all.
Well, today’s Tech Tip Tuesday is all about one little component that often causes those exact problems: the sail switch.
What is a Sail Switch?
Think of it like a mini sailboat inside your furnace. When your blower motor kicks on, it pushes air across this little flap—the “sail.” Once it moves and closes, it sends a signal to the furnace: “Hey, we’ve got enough airflow. It’s safe to ignite and produce heat.”
No airflow? No closed sail switch. And without that confirmation, your control board won’t let the furnace run. Safety first.
Common Symptoms of a Bad Sail Switch
- Fan runs, then shuts down: You’ll hear the fan blowing for 15–25 seconds, then the system just stops. That’s because the board never got the signal that the sail switch closed.
- Nothing happens at all: You turn the furnace on, but the fan never even starts. In this case, the sail switch is likely stuck closed, tricking the system into thinking there’s a problem before it can even begin.
Either way, your furnace says, “Nope, I can’t prove airflow, so I won’t run.”
Why Sail Switches Fail
Here’s the catch—sail switches are located right next to the blower motor, which means they pull in everything around them:
- Dust
- Dog hair
- Cat hair
- Even leftover debris from your RV’s construction
Over time, all that junk sticks to the sail, causing it to jam open, jam closed, or just fail altogether.
Should You Clean or Replace?
A lot of folks ask if they can just clean off their sail switch. Here’s my advice: replace it.
These parts are delicate and carefully calibrated. If you bend it even slightly while cleaning—or if it’s already weak internally—it won’t operate correctly. Swapping it out for a new one is the most reliable solution.
Preventing Sail Switch Problems
While you can’t install a filter (that would restrict airflow and cause even more issues), you can help your furnace breathe easier by keeping the area around it clean.
✅ Use a vacuum to clear away dust, pet hair, and debris around your furnace cover.
✅ Pay extra attention if your dog likes to nap in front of it!
✅ Open up the access area and clean out leftover sawdust, metal shavings, or debris from the RV’s construction.
This simple maintenance step will go a long way toward preventing problems and keeping your furnace running smoothly.
Final Takeaway
If your furnace is blowing cold air and shutting down—or refusing to start at all—the sail switch is your most likely culprit. Replacing it and keeping your furnace area clean will have you cozy and comfortable in no time.
That’s your Tech Tip Tuesday, brought to you by the National RV Training Academy—the largest hands-on RV training school in America.
Don’t forget to subscribe, so you don’t miss the next tip that could save you time, money, and frustration on the road.
Stay warm, stay safe, and happy RVing!